Normally slopes on my prints look fine, but recently I’ve been getting bad extrusion on some prints but not all. Same materials, same print file. Could this be one of the motors starting to fail? Printed on an ender 3.

Edit: so changing the POM wheels did nothing. However, I did notice while printing the layers weren’t cooling as much as they should before the next layer started. So maybe there could be a fan issue.

      • EddoWagt@feddit.nl
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Have you checked the extruder arm? They tend to crack. Although this looks more like overextruding rather than under, which you would expect if the arm was cracked. Still worth to check it out though

  • IMALlama@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    When you say same print file, I assume you mean the same gcode, same printer physical location, etc?

    Is it consistent and repeatable? For example, what happens if you print the same file back to back?

    • Prismo@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Yes to everything in the first sentence. It’s not consistent, maybe 1 in three come out perfect, then the others turn out badly.

      • IMALlama@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Does your nozzle touch your endstop or does something else? I wonder if you’re having an inconsistent first layer. That can mess up my top layer and it wouldn’t surprise me if it also impacted overhangs.

        • Prismo@lemmy.worldOP
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          I’ve not had any first layer issues, all have had good extrusion and adhesion. Nothing appears to be touching.

          • IMALlama@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            On my Voron my nozzle triggers my z endstop. I’ve noticed that if I have gunk on the nozzle from the last print I won’t consistently z home. That can lead to all kinds of interesting print inconsistencies.

      • LetterboxPancake@sh.itjust.works
        link
        fedilink
        Deutsch
        arrow-up
        3
        ·
        1 year ago

        Maybe the inconsistency is in the filament? Could you try another? It could be that the diameter of the filament varies and causes this issue.

        • Prismo@lemmy.worldOP
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Could be, however. I’ve had the same issues with multiple filaments that I’ve used for over a year, however this has only been happening in the last month.

          • LetterboxPancake@sh.itjust.works
            link
            fedilink
            Deutsch
            arrow-up
            2
            ·
            1 year ago

            Super strange. Especially as it’s only on one side. It looks nice though, if that was intentional I’d be impressed.

            Extruder gears are free?

            • Prismo@lemmy.worldOP
              link
              fedilink
              arrow-up
              3
              ·
              1 year ago

              Extruder gears seem free, but I did just notice that the POM wheels on the x-gantry seem to have flat spots in them. This could be the cause so I’ve bought some new ones to test the theory.

                • Prismo@lemmy.worldOP
                  link
                  fedilink
                  arrow-up
                  3
                  ·
                  1 year ago

                  Thanks! I’ll update the thread when I test it so there is a log for anyone else who may experience this issue.